Outdoor And Indoor Flexible Clay Composites Brick Effect Wall Tiles 3D Effect Light Weight

Outdoor And Indoor 3D Effect Light Weight Flexible Clay Composites Decorative Wall Tiles

Product Introduction:

The Flexible Clay Wall Tile produced under the use of natural raw inorganic silt soil with modern high-tech carbon fiber polymer coating technology and modified temperature curve in heterogeneous catalysis actinic.

It makes the product itself much lighter and softer. Especially for external wall of high-rise building, it is more secure and reliable.

Features:

1. Vanjoin Flexible Clay Wall Tile adopts natural modified mineral powder as aggregates, green plant fiber and other natural polymers as the reinforced materials, and thereby it reaches the goal of non-pollution directly and indirectly.

2. Compared with the external wall marble and granite’s dry-hang construction, this product’s construction is more portable and handy, greatly shortened the construction period.

3. Take natural original materials as mechanism, with previous generations’ craft products and modern art makings as basis, collecting over 300 kinds color tones and natural-born tint, it is elegant and abundant.

4. It can be used for 30-50 years for outdoor use (according to different external environments), and 50 years for indoor use, non-discoloring, according with modern city buildings’ back-to-nature features.

5. Natural raw materials makes the product does not contain formaldehyde, Volatile Organic Compounds (VCO) and other harmful volatile and radioactive compounds.

Usage:

Indoor and outdoor decoration of office buildings, hospitals, shops, restaurants, bars and other public buildings;

All kinds of new and old building constructions of indoor and outdoor decoration;

Particularly suitable for high-rise building exterior wall insulation decoration.

Interior and exterior wall decoration of family homes, luxury apartments, villas etc.

Installation:

1)Spread Tile Adhesive mixture to the tiles
Snap the line, and stick cement adhesive mixture to back side of the tiles. Adhesive mixture should be evenly applied and the thickness should be 2-3 mm, and adhesive area should cover more than 85%.

2)Fill the joints
The joints should be filled by special cement-based gap filler or silicone adhesive meeting National Standard. The adhesive mixture is not allowed to fill the joints directly to avoid alkali efflorescence.

3)Point Joints
The joints should be made by copper rod, and the joints should be dished, smooth, plump.

4)Clean wall tiles
Clean the dirt of joint filler or cement mortar on surface and sides of the tiles before setting, mapping by dry sponge or scratching by plaster trowel. Fabric cloth with water is not allowed, or else resulting in alkali efflorescence.

5)Process Exterior Corners
1.Hitom edge is on the left side of the interface, with a smooth seam sealant.
2.Make 45°Diagonal by rotary sander, and match two tiles correctly.
3.Lapping joints is not allowed at exterior joints when tiles are thin. For lapping joints, 2-3 mm seam should be made at the lapping. The seam should be filled by joint fillers and someone must be put in charge of the work, then painted by coating of same color.